|
|
Home
> Air
Mattresses
> Minute Bed AeroBed |
|
|
|
|
| |
|
| |
Dimensions |
| |
Twin:
73"L X 38"W X 7"H; supports up to 400 lbs. Item weight:
8
lbs..
Queen: 78"L X 58"W X 7"H; supports up to 750
lbs. Item weight: 11 lbs. |
| |
| |
Material |
| |
The Minute Bed is
made of a special 14 gauge nylon / PVC blend. The material
is puncture-resistant, fade-resistant, and is electronically
welded at the seams for superior strength and durability. |
| |
| |
Cleaning |
|
Minute Bed is made
of a special nylon / PVC blend that resists wear, tear,
punctures and stains better than ordinary mattresses. It is
non-allergenic, non-stainable and cleans up with soap and
water or mild household cleaners. Do not use strong
chemicals to clean your bed. Allow your Minute Bed to air
dry completely after cleaning and before storing. |
| |
| |
General Care and
Maintenance |
| |
1. Inspect your
Minute Bed prior to each use.
2. Keep your bed away from any sharp objects. Large cuts or
snags may not be repairable and will not be covered by your
Minute Bed warranty.
3. When not in use, store your bed in a clean, dry place out
of extreme temperatures. Do not allow pump or charger to get
wet at any time.
4. In case of incidental damage to your bed, a repair kit
with instructions is included with each bed. Please follow
repair kit instructions carefully. Additional vinyl repair
kits can be purchased through Customer Service.
5. Do not allow water to enter your Minute Bed through the
Air Release Valve. If water does enter the bed, make sure to
empty it and completely dry the bed before storing. |
| |
|
| |
Pump Details |
| |
Powerful and
portable yet very compact, the Rechargeable Ni-Cd pump is
included with the Minute Bed. The patented Auto on feature
allows for hands-free inflation with a simple twist of the
pump.
PUMP MUST BE CHARGED FOR 24 HOURS PRIOR TO THE FIRST
INFLATION. Use the included AC adapter to charge your new
Rechargeable Ni-Cd pump for 24 hours. For maximum
performance, be sure to fully discharge pump before
recharging. After initial charge, charge pump for 12 hours
at a time. Charging your pump for periods longer than 12
hours will substantially decrease the life of your battery.
For emergencies only, a 3-hour charge will provide one
inflation.
To Charge:
a) Remove tiny rubber plug from the hole on the back of the
pump.
b) Insert the charger's mini-plug in hole on pump.
c) Plug charger unit into any standard 110 V electrical
outlet and let it charge for no more than 12 hours after
initial 24 hour charge. (Note: 220V product sold outside
North America).
The Rechargeable Ni-Cd Pump comes complete with a
transformer for recharging. The transformer is a 120 volt
AC, 60Hz, 6W device. The pump produces 7.5 volts DC. |
| |
|
|
|
|
|
|
|
 |
|
|
0511 Regular
Price: $99.99Sale
Price: $79.99 |
|
|
|
|
|
|
|
